close

Buy Metabones Products online in United States

Sort by
Metabones Speed Booster XL 0.64x Adapter for Canon Lens to Select Micro Cameras
Optical Increase maximum aperture by 11/3 stop Increase MTF Makes lens 0.64x wider Patented 6-element/4-group optical design by Caldwell Photographic in the USA Supports 4k video mode with DX lenses Electronic Auto focus on Panasonic Micro Four Thirds cameras Can be powered either by camera body or by third-party external 5V power source (not included) Iris/aperture controlled by the camera body Image stabilization (IS) lens support Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L) EXIF (focal length, aperture, zoom range) Distance and zoom display on camcorders (requires lenses supporting distance information) Other Detachable tripod foot compatible with Arca Swiss, Markins and Photo Clam ball heads The interior is painted with flocking coating to further reduce the internal reflection Limitations Supports only Panasonic GH4, GH3, G3, G5, G6, G7, G10, GF3, GF5, GF6, GX1, Olympus E-PL7, Blackmagic Cinema Camera with Micro Four Thirds mount, Blackmagic Pocket Cinema Camera EF-S lenses require modification to fit (but third party DX lenses can be used without modification) EF-S and third party DX lenses may not cover the full Micro Four Thirds sensor in still photo and FHD video modes (but will cover 4k video mode) No autofocus support for JVC and Olympus AFC (continuous AF) and AFF (flexible AF) modes are not supported No 24p video AF Video AF may hunt more than a native lens No support for in-camera correction such as peripheral shading, CA and distortionA new Micro-4/3 mount Speed Booster adapter designed exclusively for the Panasonic GH4 and other selected Micro Four Thirds cameras (refer to the below camera compatbility table), with a magnification of 0.64x. The Speed Booster XL 0.64x uses an advanced 6-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80, a new record for Micro Four Thirds format. The new Speed Booster XL 0.64x reduces the full-frame crop factor of the Panasonic GH4 from 2.0x to 1.28x, thus effectively transforming these cameras into APS-H format. When the GH4 is used in Cinema 4k video mode the horizontal full frame crop factor is reduced from 2.34x to 1.50x, thus effectively transforming the GH4 into a super-35 format 4k cine camera. In addition, the speed of any attached lens is increased by 11/3 stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used. For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for full size Micro Four Thirds format. Compatibility The Speed Booster XL 0.64x is similar to the Blackmagic-specific 0.64x BMCC Speed Booster (MB_SPEF-BMCC-BM1), but has been completely re-designed to meet the following requirements: The working distance has increased by 1mm to permit use on the Panasonic GH4 and a number of other Micro Four Thirds cameras without touching the flexible outer cover of the camera's shutter mechanism The optics are optimized for a standard Micro Four Thirds filter stack thickness of 4mm rather than the 2.4mm found in Blackmagic cameras The image circle diameter has been increased to 21.63mm so that the full 17.3mm x 13mm Four Thirds format is covered. This has been achieved while maintaining unusually high image quality over the 17.4mm image circle used by the Panasonic GH4 in its Cinema 4k video modeAlthough the Speed Booster XL 0.64x has extra clearance compared to the 0.64x BMCC Speed Booster, there are still a number of Micro Four Thirds cameras that are not supported due to mechanical clearance issues. This is summarized in the table below, which is color-coded so that Green means the camera is supported and Red means the camera is not supported.
Metabones
Metabones Speed Booster Ultra 0.71x Adapter for Canon Lens to Micro Four Camera
Optical Increase maximum aperture by 1 stop Increase MTF of any lens attached Makes lens 0.71x wider Patented 5-element/4-group optical design incorporating ultra-high index tanatalum-based optical glass by Caldwell Photographic in the USA Electronic Auto focus on Panasonic Mirco Four Thirds cameras Can be powered either by camera body or by third-party external 5V power source (not included) Iris/aperture controlled by the camera body Image stabilization (IS) lens support Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L) EXIF (focal length, aperture, zoom range) Distance and zoom display on camcorders (requires lenses supporting distance information) Other Detachable tripod foot compatible with Arca Swiss, Markins and Photo Clam ball heads Flocking material coating to reduce the internal reflection Limitations EF-S lenses require modification to fit (but third party DX lenses can be used without modification) No autofocus support for JVC and Olympus AFC (continuous AF) and AFF (flexible AF) modes are not supported No 24p video AF Video AF may hunt more than a native lens No support for in-camera correction such as peripheral shading, CA and distortion Designed to cover an 17.3mm x 13mm sensor but not enough to cover Super35 so JVC GY-LS300 needs to have VSM configured to 80% Always Enhance and Never Degrade the Performance of the Attached Master Lens Like the ULTRA series for Sony E-mount, the new Speed Booster ULTRA m43 uses an advanced 5-element 4-group optical design incorporating ultra-high index tantalum-based optical glass. However, the new design is specifically optimized for the Micro Four Thirds sensor and filter stack and as a result achieves an astonishing level of performance that sets a new standard for focal reducers.Like the revolutionary original Metabones Speed Booster announced in January 2013, the Speed Booster ULTRA m43 has a magnification of 0.71x and so it effectively reduces the crop factor of mirrorless Micro Four Thirds mount cameras from 2.0x to 1.4x. However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology and as a result is almost perfectly corrected for use with all fullframe SLR lenses regardless of aperture. The Speed Booster ULTRA m43 will also work extremely well with many DX and APS-C format lenses provided the image circle of the lens is large enough. Optical performance of the new Speed Boosters is so good that the MTF of any lens attached to it will be improved. Even the latest generation of ultra-high performance SLR lenses such as the Zeiss Otus series can be improved by adding a Speed Booster ULTRA m43. (More information can be found in the press release here and whitepaper here) Autofocus with an Optimum Balance of Accuracy, Speed, Consistency and Reliability New in Speed Booster ULTRA for Canon EF Mount to Micro Four Thirds is autofocus on Panasonic camera bodies, subject to certain limitations (see table above for details). They are pleased to report that Panasonic Micro Four Thirds camera bodies are capable of autofocusing accurately even if the maximum aperture of the Speed Booster and the lens combined is in the sub-f/1.0 range. Although Metabones first and foremost priority is accuracy, They are able to make great strides in autofocus speed as well, which is significantly faster than a DSLR Four Thirds lens on a Panasonic Micro Four Thirds camera (with adapter) or their E-mount offerings on Sony cameras prior to Alpha 7R II. Autofocus Lens Compatibility ListAccurate Canon EF20-35mm f/3.5-4.5 USM Canon EF24-105mm f/4L IS USM Canon EF35-80mm f/4-5.6 Canon EF40mm f/2.8 STM Canon EF50mm f/1.2L USM
Metabones
Metabones Canon EF Lens to Micro Four Thirds Camera Adapter, 0.64x Magnification
A new Micro-4/3 mount Speed Booster adapter designed exclusively for the Panasonic GH4 and other selected Micro Four Thirds cameras, with a magnification of 0.64x. The Speed Booster XL 0.64x uses an advanced 6-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80, a new record for Micro Four Thirds format.The new Speed Booster XL 0.64x reduces the full-frame crop factor of the Panasonic GH4 from 2.0x to 1.28x, thus effectively transforming these cameras into APS-H format. When the GH4 is used in Cinema 4k video mode the horizontal full frame crop factor is reduced from 2.34x to 1.50x, thus effectively transforming the GH4 into a super-35 format 4k cine camera. In addition, the speed of any attached lens is increased by 1 1/3 stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used. For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for full size Micro Four Thirds format. Optical Increase maximum aperture by 11/3 stop Increase MTF Makes lens 0.64x wider Patented 6-element/4-group optical design by Caldwell Photographic in the USA Supports 4k video mode with DX lenses (except on GH5). Electronic Autofocus Can be powered either by camera body or by third-party external 5V power source (not included) Iris/aperture controlled by the camera body Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lenses Image stabilization (IS) lens support Support for cameras with in-body image stabilization (IBIS), including Panasonic GX7, GX8, GX80/85 and Olympus cameras Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L) EXIF (focal length, aperture, zoom range) Distance and zoom display on camcorders (requires lenses supporting distance information) Cinema EOS lens support (CN-E 18-80mm T4.4 L), including AF (requires external 5V power through micro USB port), auto iris and servo zoom Other New positive-lock EF lens mount. Detachable tripod foot compatible with Arca Swiss, Markins and Photo Clam ball heads. Rubber gasket protects MTF mount connection from dust and moisture. The opening is flocked with felt material to reduce internal reflection. Limitations Supports only Panasonic GH5, GH4, GH3, G3, G5, G6, G7, G10, GF3, GF5, GF6, GX1, GX8, GX80/GX85, Olympus E-PL7, PEN-F, Blackmagic Cinema Camera with Micro Four Thirds mount, Pocket Cinema Camera and Micro Cinema Camera EF-S lenses require modification to fit or may remain incompatible even after modification (but third party DX lenses can be used without modification) On GH5, Speed Booster XL can be used with full frame lenses only. DX lenses are unable to cover full-sensor-width readout + in-body image stabilizer (IBIS) EF-S and third party DX lenses does not cover the full Micro Four Thirds sensor in still photo and FHD video (but will cover 4k video mode on GH4, GX8 and GX80/85). No video AF for Olympus AF may not work if the maximum aperture of the lens plus any EF Extender or other teleconverter attached is smaller than f/8 before boost or smaller than f/5.1 after boost. AFC (continuous AF) and AFF (flexible AF) modes are not supported, except on Olympus OM-D E-M1. Panasonic video AF may hunt more than a native lens or have unsatisfactory performance. Some Tamron lenses may have unsatisfactory AF accuracy. No support for Focus Stacking and Focus Bracketing on Olympus. On Olympus, other than E-M1, you may move the single AF point among any of the 81, but you may not multi-point AF. There is no restriction on E-M1 and Panasonic. Very early Olympus models (e.g. E-PL1) have no autofocus support.
Metabones
Metabones Canon EF Lens to Micro Four Thirds Camera Adapter, 0.71x Magnification
Always Enhance and Never Degrade the Performance of the Attached Master Lens Like the ULTRA series for Sony E-mount, the new Speed Booster ULTRA m43 uses an advanced 5-element 4-group optical design incorporating ultra-high index tantalum-based optical glass. However, the new design is specifically optimized for the Micro Four Thirds sensor and filter stack and as a result achieves an astonishing level of performance that sets a new standard for focal reducers.Like the revolutionary original Metabones Speed Booster announced in January 2013, the Speed Booster ULTRA m43 has a magnification of 0.71x and so it effectively reduces the crop factor of mirrorless Micro Four Thirds mount cameras from 2.0x to 1.4x. However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology and as a result is almost perfectly corrected for use with all fullframe SLR lenses regardless of aperture. The Speed Booster ULTRA m43 will also work extremely well with many DX and APS-C format lenses provided the image circle of the lens is large enough. Optical performance of the new Speed Boosters is so good that the MTF of any lens attached to it will be improved. Even the latest generation of ultra-high performance SLR lenses such as the Zeiss Otus series can be improved by adding a Speed Booster ULTRA m43. Optical Increase maximum aperture by 1 stop Increase MTF of any lens attached Makes lens 0.71x wider Patented 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA Supports 16:9 video with DX lenses. Electronic Autofocus Can be powered either by camera body or by third-party external 5V power source (not included) Iris/aperture controlled by the camera body Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lenses Image stabilization (IS) lens support Support for cameras with in-body image stabilization (IBIS), including Panasonic GX7, GX8, GX80/85 and Olympus cameras Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L) EXIF (focal length, aperture, zoom range) Distance and zoom display on camcorders (requires lenses supporting distance information) Cinema EOS lens support (CN-E 18-80mm T4.4 L), including AF (requires external 5V power via micro USB port), auto iris and servo zoom Other New positive-lock EF lens mount. Detachable tripod foot compatible with Arca Swiss, Markins and Photo Clam ball heads. Rubber gasket protects MTF mount connection from dust and moisture. The opening is flocked with felt material to reduce internal reflection. Compatible with all MFT mount cameras, including GH4, OM-D, Blackmagic Cinema Camera, Blackmagic Pocket Cinema Camera and JVC GY-LS300. Limitations EF-S lenses require modification to fit or may remain incompatible even after modification (but third party DX lenses can be used without modification) Some EF-S and DX lenses may not have enough coverage of the entire image circle for stills after widening by 0.71x (but video will have enough coverage). No video AF for Olympus AF may not work if the maximum aperture of the lens plus any EF Extender or other teleconverter attached is smaller than f/8 before boost or smaller than f/5.6 after boost. AFC (continuous AF) and AFF (flexible AF) modes are not supported, except on Olympus OM-D E-M1. Panasonic video AF may hunt more than a native lens or have unsatisfactory performance. Some Tamron lenses may have unsatisfactory AF accuracy. No support for Focus Stacking and Focus Bracketing on Olympus.
Metabones
Metabones Speed Booster XL 0.64x Adapter for Nikon G Lens to BMPCC 4K Camera
The BMPCC4K Speed Booster ULTRA 0.71x and XL 0.64x are similar to the standard M43 Speed Booster adapters (MB_SPNFG-m43-BM2 and MB_SPNFG-m43-BM3) but the optics have been re-designed to optimize for the filter stack thickness of 2.4mm found in Blackmagic cameras rather than the 4mm of a standard Micro Four Thirds. Metabones Canon EF to BMPCC4K Speed Booster adapters are designed exclusively for Blackmagic Design Pocket Cinema Camera 4K (BMPCC4K). They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras. The BMPCC4K Speed Booster XL 0.64x reduces the crop factor of the BMPCC 4K camera from 2.02x to 1.29x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.8.
Metabones
Metabones Ultra 0.71x Speed Booster Adapter for Nikon F Lens to BMPCC 4K Camera
The BMPCC4K Speed Booster ULTRA 0.71x and XL 0.64x are similar to the standard M43 Speed Booster adapters (MB_SPNFG-m43-BM2 and MB_SPNFG-m43-BM3) but the optics have been re-designed to optimize for the filter stack thickness of 2.4mm found in Blackmagic cameras rather than the 4mm of a standard Micro Four Thirds. Metabones Canon EF to BMPCC4K Speed Booster adapters are designed exclusively for Blackmagic Design Pocket Cinema Camera 4K (BMPCC4K). They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras.The BMPCC4K Speed Booster ULTRA 0.71x reduces the crop factor of the BMPCC 4K camera from 2.02x to 1.43x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.9.
Metabones
Metabones T Speed Booster SUPER16 0.58x Adapter for Canon EF Lens to MFT Mount
Metabones Canon EF to Micro Four Thirds Speed BoosterTM SUPER16 adapters are designed exclusively for Blackmagic Design cameras with Super 16mm sensor size, such as Blackmagic Mirco Cinema Camera (BMMCC), Micro Studio Camera 4K (BMMSC 4K) and the original Pocket Cinema Camera HD(BMPCC).They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras and they are not compatible with the newly released Blackmagic Pocket Cinema Camera 4K (BMPCC4K).The 0.58x Speed Booster SUPER16 reduces the crop factor of the Blackmagic Design cameras with Super 16mm sensor size from 3.02x to 1.75x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.74.Key FeaturesOptical Canon EF mount lens to M43 mount camcorders, specific for Blackmagic Design cameras with Super16mm sensor size Increase maximum aperture by 1 2/3stop. (with a maximum output aperture of f/0.74) Increase MTF Makes lens 0.58x wider Patented 6-element/4-group optical design by Caldwell Photographic in the USAElectronic Lens iris/aperture is set by the controls on the camera body Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lens models Image stabilization (IS) lens support Push autofocus if supported by camera Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L) Cinema EOS lens support (CN-E 18-80mm T4.4 L), including AF (requires external 5V power via micro USB port), auto iris and servo zoom Powered by camera body. With most lenses, no external power source requiredMechanical The tripod foot is detachable and compatible with Arca Swiss, Markins and Photo Clam ball heads Flocking to reduce internal reflection Rubber gasket protects M43 mount connection from dust and moisture Aluminum alloy and brass construction with chromium plating Satin surface finish
Metabones
Metabones T CINE Speed Booster ULTRA 0.71x Adapter, Canon EF Lens to BMPCC4K
The BMPCC4K Speed Booster ULTRA 0.71x is similar to the standard M43 Speed Booster adapter but the optics have been re-designed to optimize for the filter stack thickness of 2.4mm found in Blackmagic cameras rather than the 4mm of a standard Micro Four Thirds. In addition to optimized optical design, the CINE version is equipped with an extremely robust cine-style positive locking mechanism to ensure that no play occurs during focusing. This is especially important when using EF lenses for cine work because even though they provide a very smooth focus movement. Metabones Canon EF to BMPCC4K Speed Booster adapters are designed exclusively for Blackmagic Design Pocket Cinema Camera 4K (BMPCC4K). They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras. The BMPCC4K Speed Booster ULTRA 0.71x reduces the crop factor of the BMPCC 4K camera from 2.02x to 1.43x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.9. Optical Canon EF mount lens to Blackmagic Design cameras with M43 mount, specific for BMPCC4K Increase maximum aperture by 1-stop. (with a maximum output aperture of f/0.9) Increase MTF Makes lens 0.71x wider Patented 6-element/4-group optical design by Caldwell Photographic in the USA Electrical Lens iris/aperture is set by the controls on the camera body Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lens models Image stabilization (IS) lens support Push autofocus if supported by camera Cinema EOS lens support (CN-E 18-80mm T4.4 L), including AF (requires external 5V power via micro USB port), auto iris and servo zoom Powered by camera body. With most lenses, no external power source required Mechanical Patented positive-lock EF lens mount Detachable tripod foot compatible with Arca Swiss Style ball head, such as Markins and Photo Clam or attach to quick release plate by a 1/4"-20 screw The tripod foot is tailor-made to match the exact height as the BMPCC4K camera body Flocking to reduce internal reflection Rubber gasket protects M43 mount connection from dust and moisture Aluminum alloy and brass construction with chromium plating Satin surface finish
Metabones
Metabones PL to Sony E-mount T CINE Speed Booster ULTRA 0.71x Adapter
Since its inception, Metabones has been designing and manufacturing lens adapters recognized among professionals and enthusiasts as leaders in design and workmanship. Contrary to the popular trend of other factories using an aluminum ring painted black on the camera-body-side, we instead take no short-cut but use precision-machined brass with chromium plating on both the camera-body and the lens sides of our adapters, in order to ensure smooth mounting, great appearance and durability. Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium Satin surface finish - just like your OEM lens and camera mounts Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements True electronic integration of aperture diaphragm - let camera automatically choose aperture in P or S exposure modes or dial in yourself on the camera body in A or M modes EXIF data such as lens identification, focal length and apertureThe lens side of the adapter features a strong leaf-spring structure, strengthening the adapter-lens connection and ensuring tightness of the lens in order to reduce wear and prevent focus errors and optical alignment issues from appearing. Metabones uses matte-black treatment to keep internal reflection to a minimum in order to maintain the maximum optical quality possible with the lens. All Metabones Adapters follow this tradition of uncompromising precision, robust build quality and outstanding finish. Speed Booster ULTRA for E-Mount and X-mount cameras Sharper corners, less distortion, reduced vignetting New optical design: advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass to achieve extraordinary optical performance with improved corner sharpness, distortion and reduced vignetting.Like the revolutionary original Metabones Speed Booster announced in January 2013, the Speed Booster ULTRA has a magnification of 0.71x and so it effectively reduces the crop factor of mirrorless cameras with DX-sized sensors and Super35 camcorder, such as Sony E-mount, Fuji X-mount cameras Sony FS7 MARKII, from 1.5x to 1.07x. However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology and as a result is well corrected for use with virtually all fullframe SLR/Prime lenses regardless of exit pupil distance. Features and benefits Optical/Mechanical Design for attaching full-frame PL Prime Lens to Sony E-mount cameras/camcorders Increase maximum aperture by 1 stop Increase MTF Makes lens 0.71x wider Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent pending) New positive-lock PL lens mount. (Patent pending) Felt material flocked inside the opening to reduce internal reflection Compatible with Sony FS7 Mark II camera The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo Clam ball heads Limitations Optical/mechanical Metabones PL T CINE Speed Booster TM adapters are designed exclusively for the Zeiss CP.2 and CZ.2 lenses Speed Booster ULTRA is designed to cover an APS-C/Super35 image circle which is not big enough to cover a full-size 36mm x 24mm sensor. On a full frame camera body (A7 series, NEX-VG900) the camera needs to have "APS-C/Super 35mm" set to either "Auto" or "On"
Metabones
Metabones T Speed Booster ULTRA 0.71x Adapter for Canon EF to EF-M Mount Camera
Sharper corners, less distortion, reduced vignettingOptical design: advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass to achieve extraordinary optical performance with improved corner sharpness, distortion and reduced vignetting.Like the revolutionary original Metabones Speed Booster announced in January 2013, the Speed Booster ULTRA has a magnification of 0.71x, and so it effectively reduces the crop factor of mirrorless cameras with DX-sized sensors(APS-C), such as Sony E-mount and Fuji X-mount cameras, from 1.5x to 1.07x. However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is well corrected for use with virtually all full-frame SLR lenses regardless of exit pupil distance.Thus, the Speed Booster ULTRA performs extremely well with professional-grade f/2.8 zoom lenses such as the 24-70mm f/2.8 and 70-200mm f/2.8 zooms by Canon and Nikon to produce 17-50mm f/2.0 and 50-142mm f/2.0 high-speed zooms, respectively. Similarly, high-speed fixed focal length lenses such as a 50mm f/1.2 will be transformed into a 35.5mm f/0.9 lens with excellent contrast and resolution from the center all the way to the edges of the image.Key FeaturesOptical Increase maximum aperture by 1 stop. (with a maximum output aperture of f/0.9) Increase MTF Makes lens 0.71x wider Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent granted)Electronic Autofocus. AF speed is properly adjusted to account for and leverage the shorter focal length and the brighter maximum aperture Focal length and aperture are adjusted in EXIF Image stabilization (IS) lens support VIdeo Digital IS support (on supported camera bodies) Store EXIF data (lens name, focal length and maximum/minimum aperture) for one manual lens in the adapter LED indicator shows communication status Powered by camera body. With most lenses, no external power source requiredMechanical The tripod foot is detachable and compatible with Arca Swiss, Markins and Photo Clam ball heads Flocking to reduce internal reflection Rubber gasket protects EF-M mount connection from dust and moisture Aluminum alloy and brass construction with chromium plating Satin surface finish
Metabones
Metabones ULTRA 0.71x T CINE Speed Booster for PL-Mount Lens to BMPCC 4K Camera
Like the ULTRA series for Mirco Four-Thirds mount, the new BMPCC4K Speed Booster? ULTRA 0.71x uses an advanced 6-element 4-group optical design incorporating ultra-high index tantalum-based optical glass. However, the new design is specifically optimized for the BMPCC4K sensor and filter stack and as a result, achieves an astonishing level of performance that sets a new standard for focal reducers. Metabones ARRI PL to BMPCC4K Speed Booster adapters is designed exclusively for Blackmagic Design Pocket Cinema Camera 4K (BMPCC4K). They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras.The BMPCC4K Speed Booster ULTRA 0.71x reduces the crop factor of the BMPCC 4K camera from 2.02x to 1.43x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.9. Limitations Metabones PL T CINE Speed Booster adapters are designed exclusively for the Zeiss CP.2, CZ.2 and CP.3 lenses Compatible with Blackmagic Design MFT-mount camera only. When this Speed Booster is used with other MFT camera(Panasonic, Olympus & JVC), it may cause damage to the camera
Metabones
Metabones T CINE Speed Booster XL 0.64x Adapter, Canon EF Lens to BMPCC4K Camera
The BMPCC4K Speed Booster ULTRA XL 0.64x is similar to the standard M43 Speed Booster adapter but the optics have been re-designed to optimize for the filter stack thickness of 2.4mm found in Blackmagic cameras rather than the 4mm of a standard Micro Four Thirds. In addition to optimized optical design, the CINE version is equipped with an extremely robust cine-style positive locking mechanism to ensure that no play occurs during focusing. This is especially important when using EF lenses for cine work because even though they provide a very smooth focus movement. Metabones Canon EF to BMPCC4K Speed Booster adapters are designed exclusively for Blackmagic Design Pocket Cinema Camera 4K (BMPCC4K). They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras. The BMPCC4K Speed Booster XL 0.64x reduces the crop factor of the BMPCC 4K camera from 2.02x to 1.29x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.8. Optical Canon EF mount lens to Blackmagic Design cameras with M43 mount, specific for BMPCC4K Increase maximum aperture by 1 1/3 stop. (with a maximum output aperture of f/0.80) Increase MTF Makes lens 0.64x wider Patented 7-element/4-group optical design by Caldwell Photographic in the USA Electrical Lens iris/aperture is set by the controls on the camera body Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lens models Image stabilization (IS) lens support Push autofocus if supported by camera Powered by camera body. With most lenses, no external power source required Mechanical Patented positive-lock EF lens mount Detachable tripod foot compatible with Arca-type ball head, such as Arca Swiss, Markins and Photo Clam or attach to quick release plate by a 1/4" 20 screw The tripod foot is tailor-made to match the exact height as the BMPCC4K camera body Flocking to reduce internal reflection Rubber gasket protects M43 mount connection from dust and moisture Aluminum alloy and brass construction with chromium plating Satin surface finish
Metabones
Metabones Contax N Lens to Sony E-Mount Camera T Smart Adapter,Black Matte/Satin
Owners of legendary Carl Zeiss optics in Contax N-Mount have long demanded a trusted migration path to mirrorless cameras. With the advent of Metabones Contax N-Mount to Sony E-Mount Smart Adapter, the longing is over. Built upon the foundation of Metabones' past success, phase-detection autofocus on A9, A7R Mark III, A7 Mark III, A7R Mark II, A7 Mark II, A6500 and A6300 not only offers pinpoint accuracy but also AF speed significantly surpassing the original Contax N series AF cameras. (Tailored to single-lens reflex cameras with a traditional phase-detection autofocus system, Contax N lenses are not compatible with contrast-detection autofocus mirrorless cameras such as A7S Mark II.)Get a glimpse of the ergonomic experience of the original Contax N1 camera by using the lens' own aperture ring in aperture priority and manual exposure modes on A9, A7 series, A6500 and A6300. Fully automatic exposure and shutter priority are also available. A customizable button on the adapter can be assigned to more than 50 different functions on an A9, A7 series, A6500 or A6300 camera, including depth-of-field preview. Putting that button on the hand-grip side would have matched a genuine Contax N camera, but since that would have been next to Sony's lens release button, we opted to place this customizable button on the other side of the adapter instead, right where the thumb of your left hand is.The workmanship and attention to detail are evident from the signature Metabones design and the two electrical contacts carrying power, which are thicker in the same way as a genuine Contax N series autofocus camera. The inside of the adapter is flocked with felt to minimize internal reflection. A tripod foot compatible with Arca-Swiss style quick release is included. Metabones has a proven track record of firmware stability and timely firmware support. Firmware is user-upgradable via the adapter's micro USB port.Metabones adapters relay distance information from the lens to the camera body to enable full 5-axis in-body image stabilization of the A9, A7 Mark III series, A7 Mark II series and A6500. (The Contax 645 Makro-Planar 4/120 lens does not report distance information and supports only 3-axis in-body image stabilization.) Contax made history by offering the world's first full-frame digital camera, Contax N-Digital, in 2002. All Contax products had been discontinued by 2005, leaving some of the finest autofocus optics ever made in search of a successor. None of these lenses feature optical image stabilization and this is where the 5-axis in-body image stabilization (SteadyShot INSIDE) of Sony A9, A7 Mark III series, A7 Mark II series and A6500 comes in as a much-needed complement.The heritage lives on, with the very same Carl Zeiss lenses from the dawn of full-frame digital photography now leveraging the latest and greatest mirrorless camera features and poised to benefit from further technological advances in the future.
Metabones
Metabones Canon EF/EF-S Lens to Sony E Mount T CINE Smart Adapter (5 Generation)
Metabones Canon EF/EF-S Lens to Sony E Mount T CINE Smart Adapter, 5th Gen. Features a positive-lock EF lens mount carried over from the critically acclaimed Metabones EF-FZ CINE Smart Adapter, a perfect companion to the positive-lock mount of the new Sony FS7 Mark II camera. Equipped with a rubber gasket to protect the E-mount connection from dust and moisture. To promote ease-of-use, an LED indicates the adapter's operation mode, optical image stabilization operation and communication status. A dedicated switch controls in-body image stabilization (IBIS) on Sony cameras equipped with SteadyShot INSIDE.
Metabones
Back to Top