DVIGear DNS-200 DisplayNet Server w/3-Yr Warranty
DVIGear DNS-200 DisplayNet Server consist of multiple transmitter and receiver endpoints, a 10GbE network switch and a DisplayNet Server & #174;, which provides the interface layer required to control and manage the entire system. The server is a rack-mountable PC running the DisplayNet API service, enabling clients with a network connection to the server to control the system. Using DisplayNet Server, systems can be managed using a number of control methods, which enables the technology to be seamless integrated into a variety of workflows. DisplayNet Server provides a central interface between the control equipment/software and the DisplayNet endpoint devices; therefore, it should be included with every DisplayNet system.
The DisplayNet Server & #174; is a 1U, Ultra-Quiet Rackmount PC running Windows 10 Professional. DisplayNet API is pre-installed on the server and supports the use of DisplayNet Manager & #8482; browser-based software application. DisplayNet Manager includes tools to route signals, configure device settings, build Video Wall configurations, build MultiViewer layouts and configurations, perform EDID management, save presets, and view DisplayNet API commands. DisplayNet Manager and DisplayNet API provide unique features that enable rapid application deployment with third party control systems. This makes it exceptionally easy to integrate DisplayNet into a wide range of professional AV applications and workflows.
DVIGear DNS-200 DisplayNet Server Features:
Utilizes SDVoE Technology to distribute AV signals with off-the-shelf 10GbE network switches
Supports HDMI 2.0 signals with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0).(1)
Includes scaling in the Receiver to enable Fast Switching.
Vastly superior to existing Video-over-IP products: zero frame latency, zero compression(1), zero artifacts
Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Downmixed Audio, High Speed USB 2.0 (480 Mbps.), Bidirectional IR, RS-232 and 1GbE over 10GbE link
Fully Routable, Independent Switching Layers for all signal types: Video, Embedded Audio, Analog Audio, Downmixed Audio, USB, IR, RS-232
Supports Audio Embedding, De-embedding and Down-Mixing
Create, save, and use video wall configurations with optimized bezel correction
Unconstrained scalability - Size of I/O array only limited by number of 10GbE switch ports
Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable (DN-210 / DN-210U)
Maximum range up to 30 km using 10GbE optical version (DN-220 / DN-220U)
DisplayNet Server & #8482; and DisplayNet Manager & #8482; enable deep integration into new or existing AV systems
All endpoints include a built-in 1GbE Ethernet switch for high-speed local network connections
DVIGear DN-210-RX DisplayNet HDMI 10GbE Receiver w/3-Yr Warranty
DVIGear DN-210-RX DisplayNet HDMI 10GbE Transmitter is a dramatic extension of the DisplayNet AV-over-IP product line. It leverages the latest SDVoE technology to distribute uncompressed AV signals with resolutions up to 4K /60p over a 10GbE Ethernet network. The DN-200 Series adds support for HDMI 2.0 with up to 12-bit color, HDCP 2.2, DisplayPort 1.2, and High Speed USB 2.0. A high-performance scaler in both the Transmitter (Tx) and Receiver (Rx) units enables very Fast Switching, MultiViewer, and enhanced Video Wall processing.
Each Tx unit accepts multiple source signals including HDMI (with embedded audio and HDCP), DisplayPort, analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet. These input signals are packetized into a single 10GbE link and are distributed to destinations via an off-the-shelf 10GbE network switch. The DN-200 Series supports twisted pair (CAT6a or CAT7) media up to 328 ft. (100 meters), or Fiber Optic media using an industry standard SFP+ module supporting extension distances up to 18 miles (30 km). The 10GbE switch provides a highly efficient and reliable means of distributing AV signals from many sources to an array of Rx units, which convert the packetized 10GbE data to AV output signals at the destination in real time without introducing frame latency or any loss of image quality.
The DN-200 Series distributes video with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) without image artifacts and without frame latency. When the video signal exceeds the bandwidth limits of 10GbE, very light compression (maximum ratio of about 1.4:1) is used. Video signals may be routed in Point-to-Point, Matrix Switching, Video Wall, and MultiViewer modes all in the same system. For optimum flexibility, each signal layer (Video, Embedded Audio, Downmixed Audio, Analog Audio, IR, RS-232, and 1GbE) can each be routed completely independently from one another. Advanced audio features are supported, including: networked audio, audio embedding, de-embedding and down-mixing.
DN-200 Series transmitter and receiver units are controlled by a DisplayNet Server & #8482; (DNS-200), which includes powerful DisplayNet Manager & #8482; web browser-based software that enables the system to be managed using any third-party controller using simple Telnet commands.
DVIGear DN-210-RX DisplayNet HDMI 10GbE Transmitter Features:
Utilizes SDVoE Technology to distribute AV signals with off-the-shelf 10GbE network switches
Supports HDMI 2.0 signals with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0).(1)
Includes scaling in the Receiver to enable Fast Switching.
Vastly superior to existing Video-over-IP products: zero frame latency, zero compression(1), zero artifacts
Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Downmixed Audio, High Speed USB 2.0 (480 Mbps.), Bidirectional IR, RS-232 and 1GbE over 10GbE link
Fully Routable, Independent Switching Layers for all signal types: Video, Embedded Audio, Analog Audio, Downmixed Audio, USB, IR, RS-232
Supports Audio Embedding, De-embedding and Down-Mixing
Create, save, and use video wall configurations with optimized bezel correction
Unconstrained scalability - Size of I/O array only limited by number of 10GbE switch ports
Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable (DN-210 / DN-210U)
Maximum range up to 30 km using 10GbE optical version (DN-220 / DN-220U)
DisplayNet Server & #8482; and DisplayNet Manager & #8482; enable deep integration into new or existing AV systems
All endpoints include a built-in 1GbE Ethernet switch for high-speed local network connections
DVIGear DN-220-RX DisplayNet Optical 10GbE Receiver w/3-Yr Warranty
DVIGear DN-220-RX DisplayNet Optical 10GbE Receiver is a dramatic extension of the DisplayNet AV-over-IP product line. It leverages the latest SDVoE technology to distribute uncompressed AV signals with resolutions up to 4K /60p over a 10GbE Ethernet network. The DN-200 Series adds support for HDMI 2.0 with up to 12-bit color, HDCP 2.2, DisplayPort 1.2, and High Speed USB 2.0. A high-performance scaler in both the Transmitter (Tx) and Receiver (Rx) units enables very Fast Switching, MultiViewer, and enhanced Video Wall processing.
Each Tx unit accepts multiple source signals including HDMI (with embedded audio and HDCP), DisplayPort, analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet. These input signals are packetized into a single 10GbE link and are distributed to destinations via an off-the-shelf 10GbE network switch. The DN-200 Series supports twisted pair (CAT6a or CAT7) media up to 328 ft. (100 meters), or Fiber Optic media using an industry standard SFP+ module supporting extension distances up to 18 miles (30 km). The 10GbE switch provides a highly efficient and reliable means of distributing AV signals from many sources to an array of Rx units, which convert the packetized 10GbE data to AV output signals at the destination in real time without introducing frame latency or any loss of image quality.
The DN-200 Series distributes video with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) without image artifacts and without frame latency. When the video signal exceeds the bandwidth limits of 10GbE, very light compression (maximum ratio of about 1.4:1) is used. Video signals may be routed in Point-to-Point, Matrix Switching, Video Wall, and MultiViewer modes all in the same system. For optimum flexibility, each signal layer (Video, Embedded Audio, Downmixed Audio, Analog Audio, IR, RS-232, and 1GbE) can each be routed completely independently from one another. Advanced audio features are supported, including: networked audio, audio embedding, de-embedding and down-mixing.
DN-200 Series transmitter and receiver units are controlled by a DisplayNet Server & #8482; (DNS-200), which includes powerful DisplayNet Manager & #8482; web browser-based software that enables the system to be managed using any third-party controller using simple Telnet commands.
DVIGear DN-220-RX DisplayNet Optical 10GbE Receiver Features:
Utilizes SDVoE Technology to distribute AV signals with off-the-shelf 10GbE network switches
Supports HDMI 2.0 signals with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0).(1)
Includes scaling in the Receiver to enable Fast Switching.
Vastly superior to existing Video-over-IP products: zero frame latency, zero compression(1), zero artifacts
Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Downmixed Audio, High Speed USB 2.0 (480 Mbps.), Bidirectional IR, RS-232 and 1GbE over 10GbE link
Fully Routable, Independent Switching Layers for all signal types: Video, Embedded Audio, Analog Audio, Downmixed Audio, USB, IR, RS-232
Supports Audio Embedding, De-embedding and Down-Mixing
Create, save, and use video wall configurations with optimized bezel correction
Unconstrained scalability - Size of I/O array only limited by number of 10GbE switch ports
Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable (DN-210 / DN-210U)
Maximum range up to 30 km using 10GbE optical version (DN-220 / DN-220U)
DisplayNet Server & #8482; and DisplayNet Manager & #8482; enable deep integration into new or existing AV systems
All endpoints include a built-in 1GbE Ethernet switch for high-speed local network connections
DVIGear DN-220-TX DisplayNet Optical 10GbE Transmitter w/3-Yr Warranty
DVIGear DN-220-TX DisplayNet Optical 10GbE Transmitter is a dramatic extension of the DisplayNet AV-over-IP product line. It leverages the latest SDVoE technology to distribute uncompressed AV signals with resolutions up to 4K /60p over a 10GbE Ethernet network. The DN-200 Series adds support for HDMI 2.0 with up to 12-bit color, HDCP 2.2, DisplayPort 1.2, and High Speed USB 2.0. A high-performance scaler in both the Transmitter (Tx) and Receiver (Rx) units enables very Fast Switching, MultiViewer, and enhanced Video Wall processing.
Each Tx unit accepts multiple source signals including HDMI (with embedded audio and HDCP), DisplayPort, analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet. These input signals are packetized into a single 10GbE link and are distributed to destinations via an off-the-shelf 10GbE network switch. The DN-200 Series supports twisted pair (CAT6a or CAT7) media up to 328 ft. (100 meters), or Fiber Optic media using an industry standard SFP+ module supporting extension distances up to 18 miles (30 km). The 10GbE switch provides a highly efficient and reliable means of distributing AV signals from many sources to an array of Rx units, which convert the packetized 10GbE data to AV output signals at the destination in real time without introducing frame latency or any loss of image quality.
The DN-200 Series distributes video with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) without image artifacts and without frame latency. When the video signal exceeds the bandwidth limits of 10GbE, very light compression (maximum ratio of about 1.4:1) is used. Video signals may be routed in Point-to-Point, Matrix Switching, Video Wall, and MultiViewer modes all in the same system. For optimum flexibility, each signal layer (Video, Embedded Audio, Downmixed Audio, Analog Audio, IR, RS-232, and 1GbE) can each be routed completely independently from one another. Advanced audio features are supported, including: networked audio, audio embedding, de-embedding and down-mixing.
DN-200 Series transmitter and receiver units are controlled by a DisplayNet Server & #8482; (DNS-200), which includes powerful DisplayNet Manager & #8482; web browser-based software that enables the system to be managed using any third-party controller using simple Telnet commands.
DVIGear DN-220-TX DisplayNet Optical 10GbE Transmitter Features:
Utilizes SDVoE Technology to distribute AV signals with off-the-shelf 10GbE network switches
Supports HDMI 2.0 signals with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0).(1)
Includes scaling in the Receiver to enable Fast Switching.
Vastly superior to existing Video-over-IP products: zero frame latency, zero compression(1), zero artifacts
Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Downmixed Audio, High Speed USB 2.0 (480 Mbps.), Bidirectional IR, RS-232 and 1GbE over 10GbE link
Fully Routable, Independent Switching Layers for all signal types: Video, Embedded Audio, Analog Audio, Downmixed Audio, USB, IR, RS-232
Supports Audio Embedding, De-embedding and Down-Mixing
Create, save, and use video wall configurations with optimized bezel correction
Unconstrained scalability - Size of I/O array only limited by number of 10GbE switch ports
Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable (DN-210 / DN-210U)
Maximum range up to 30 km using 10GbE optical version (DN-220 / DN-220U)
DisplayNet Server & #8482; and DisplayNet Manager & #8482; enable deep integration into new or existing AV systems
All endpoints include a built-in 1GbE Ethernet switch for high-speed local network connections
DVIGear DVI-3720a 3G / HD-SDI to HDMI Converter w/3-Yr Warranty
DVIGear DVI-3720a 3G / HD-SDI to HDMI Converter allows SD-SDI, HD-SDI or 3G-SDI signals to be displayed on an HDMI display device. The unit includes 2x equalized and re-clocked SDI outputs for local monitor or long distance extension up to 330 ft. (~ 100 meters). Analog stereo audio break-out connections are also included.
DVIGear DVI-3720a 3G / HD-SDI to HDMI Converter Features:
SD-SDI, HD-SDI, and 3G-SDI to HDMI Signal Conversion
Simultaneous 3G-SDI and HDMI outputs
Bit rates of up to 2.970 Gbps.
2x Equalized and Re-Clocked Looped SDI Outputs
Embedded LPCM 2.0 or LPCM 7.1 audio over the HDMI output
Conversion of SMPTE 425M B to A for 1080p
Extends 3G-SDI up to 330 ft. (~ 100m)
DVIGear DN-220U-RX DisplayNet USB Optical 10GbE Receiver w/3-Yr Warranty
DVIGear DN-220U-RX DisplayNet USB Optical 10GbE Receiver is a dramatic extension of the DisplayNet AV-over-IP product line. It leverages the latest SDVoE technology to distribute uncompressed AV signals with resolutions up to 4K /60p over a 10GbE Ethernet network. The DN-200 Series adds support for HDMI 2.0 with up to 12-bit color, HDCP 2.2, DisplayPort 1.2, and High Speed USB 2.0. A high-performance scaler in both the Transmitter (Tx) and Receiver (Rx) units enables very Fast Switching, MultiViewer, and enhanced Video Wall processing.
Each Tx unit accepts multiple source signals including HDMI (with embedded audio and HDCP), DisplayPort, analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet. These input signals are packetized into a single 10GbE link and are distributed to destinations via an off-the-shelf 10GbE network switch. The DN-200 Series supports twisted pair (CAT6a or CAT7) media up to 328 ft. (100 meters), or Fiber Optic media using an industry standard SFP+ module supporting extension distances up to 18 miles (30 km). The 10GbE switch provides a highly efficient and reliable means of distributing AV signals from many sources to an array of Rx units, which convert the packetized 10GbE data to AV output signals at the destination in real time without introducing frame latency or any loss of image quality.
The DN-200 Series distributes video with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) without image artifacts and without frame latency. When the video signal exceeds the bandwidth limits of 10GbE, very light compression (maximum ratio of about 1.4:1) is used. Video signals may be routed in Point-to-Point, Matrix Switching, Video Wall, and MultiViewer modes all in the same system. For optimum flexibility, each signal layer (Video, Embedded Audio, Downmixed Audio, Analog Audio, IR, RS-232, and 1GbE) can each be routed completely independently from one another. Advanced audio features are supported, including: networked audio, audio embedding, de-embedding and down-mixing.
DN-200 Series transmitter and receiver units are controlled by a DisplayNet Server & #8482; (DNS-200), which includes powerful DisplayNet Manager & #8482; web browser-based software that enables the system to be managed using any third-party controller using simple Telnet commands.
DVIGear DN-220U-RX DisplayNet USB Optical 10GbE Receiver Features:
Utilizes SDVoE Technology to distribute AV signals with off-the-shelf 10GbE network switches
Supports HDMI 2.0 signals with resolutions up to 4K /60p with 8-bit color (4:4:4) and 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0).(1)
Includes scaling in the Receiver to enable Fast Switching.
Vastly superior to existing Video-over-IP products: zero frame latency, zero compression(1), zero artifacts
Supports HDMI, HDCP, Embedded Audio, Analog Stereo Audio, Downmixed Audio, High Speed USB 2.0 (480 Mbps.), Bidirectional IR, RS-232 and 1GbE over 10GbE link
Fully Routable, Independent Switching Layers for all signal types: Video, Embedded Audio, Analog Audio, Downmixed Audio, USB, IR, RS-232
Supports Audio Embedding, De-embedding and Down-Mixing
Create, save, and use video wall configurations with optimized bezel correction
Unconstrained scalability - Size of I/O array only limited by number of 10GbE switch ports
Maximum range up to 100 meters (328 ft.) using a single CAT6a or CAT7 cable (DN-210 / DN-210U)
Maximum range up to 30 km using 10GbE optical version (DN-220 / DN-220U)
DisplayNet Server & #8482; and DisplayNet Manager & #8482; enable deep integration into new or existing AV systems
All endpoints include a built-in 1GbE Ethernet switch for high-speed local network connections
DVIGear DVI-2560-SHR HDMI SHR 22AWG, 60 Meters Cable w/3-Yr Warranty
DVIGear DVI-2560-SHR HDMI Super High Resolution Copper Cables 60 Meters are engineered for unsurpassed performance and reliability in mission critical applications.KEY_TAB KEY_TAB These cables are designed to transport high speed digital HDMI signals over very long distances while maintaining pristine signal / bit integrity.
High-Speed SignalsKEY_TAB & mdash; Long distance transport of high resolution HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter.KEY_TAB KEY_TAB Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing.KEY_TAB KEY_TAB Skew occurs when the differential HDMI signals get delayed and become out of phase as they pass over a long cable.KEY_TAB KEY_TAB Both factors contribute to increased digital jitter, which degrades the performance of the cable.KEY_TAB KEY_TAB This jitter becomes more severe with higher resolutions and longer cable distances.KEY_TAB KEY_TAB Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances.KEY_TAB KEY_TAB The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced DesignKEY_TAB & mdash; Built to overcome these challenges, the SHR & trade; Series HDMI Cables are constructed using heavy gauge 22AWG copper wires.KEY_TAB KEY_TAB This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter.KEY_TAB KEY_TAB When coupled with DVIGear's Active Cable Extenders (ACE & trade;), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with HDMI signal parameters.KEY_TAB KEY_TAB The combination of these products are active copper cables with minimal insertion loss and skew. These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability.
DVIGear DVI-2560-SHR HDMI Super High Resolution Copper Cables 60 Meters Features:
Cables 20m or longer include DVIGear's ACE & trade; (Active Cable Extender)
Supports HDTV resolutions up to 1080p with 12-bit color
Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60m
Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m
Supports HDMI data rates up to 2.25 Gbps. at lengths up to 40m
Supports PC data rates up to 1.65 Gbps. at lengths up to 60m
Heavy-duty 22AWG copper wires provide minimal insertion loss
Ultra-low Skew guarantees unsurpassed digital fidelity
Triple shielded for superior noise immunity
Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
DVIGear DVI-2615-HR 15m 24AWG DisplayPort High Resolution Copper Cable w/3-Yr Warranty
DVIGear DVI-2615-HR 15m 24AWG DisplayPort High Resolution Copper Cable is supports resolutions up to 4096x2160 / 60p, supports DisplayPort data rates up to 21.6 Gpbs.
Superior Performance : DVIGear's High Resolution & #8482; (HR & #8482;) DisplayPort cables are engineered for unsurpassed performance and reliability in mission critical applications. These cables are designed to transport high speed digital DisplayPort signals with bit rates up to 21.6 Gbps. over long distances while maintaining pristine signal integrity.
High-Speed Signals : Long distance transport of high resolution DisplayPort signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter. Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing. Skew occurs when the differential DisplayPort signals get delayed and become out of phase as they pass over a long cable. Both factors contribute to increased digital jitter, which degrades the performance of the cable.
This jitter becomes more severe with higher resolutions, higher bit rates and longer cable distances. Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances. The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design : Built to overcome these challenges, DVIGear's HR & #8482; Series DisplayPort Cables are constructed using heavy gauge 24AWG copper wires that provide superior ruggedness and durability. The heavier wire gauge has increased cross-sectional cable area and decreased cable capacitance, which allows signals with higher data rates to pass with minimal jitter. This enables cable lengths of up to 15 meters (~ 50 ft.) with full compliance with DisplayPort 1.2 signal parameters.
DVIGear DVI-2615-HR 15m 24AWG DisplayPort High Resolution Copper Cable Features:
Supports resolutions up to 4096x2160 / 60p
Supports cable lengths up to 15 m (~ 50 ft.) (1)
Supports DisplayPort data rates up to 21.6 Gpbs
Heavy-duty 24AWG copper wires provide minimal insertion loss
Ultra-low Skew guarantees unsurpassed digital fidelity
Triple shielded for superior noise immunity
Gold flash plated connectors provide superior conductivity
Locking connector mechanism for added security
DVIGear DVI-2460-SHR HDMI to DVI-D SHR 22AWG, 60 Meters Cable w/3-Yr Warranty
DVIGear DVI-2460-SHR HDMI to DVI-D Super High Resolution Copper Cables 60 Meters are engineered for unsurpassed performance and reliability in mission critical applications.KEY_TAB KEY_TAB These cables are designed to transport high speed digital DVI and HDMI signals over very long distances while maintaining pristine signal / bit integrity.
High-Speed SignalsKEY_TAB & mdash; Long distance transport of high resolution DVI and HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter.KEY_TAB KEY_TAB Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing.KEY_TAB KEY_TAB Skew occurs when the differential DVI and HDMI signals get delayed and become out of phase as they pass over a long cable.KEY_TAB KEY_TAB Both factors contribute to increased digital jitter, which degrades the performance of the cable.KEY_TAB KEY_TAB This jitter becomes more severe with higher resolutions and longer cable distances.KEY_TAB KEY_TAB Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances.KEY_TAB KEY_TAB The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced DesignKEY_TAB & mdash; Built to overcome these challenges, the SHR & trade; Series HDMI to DVI Cables are constructed using heavy gauge 22AWG copper wires.KEY_TAB KEY_TAB This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter.KEY_TAB KEY_TAB When coupled with DVIGear & rsquo;s Active Cable Extenders (ACE & trade;), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with DVI and HDMI signal parameters.KEY_TAB KEY_TAB The combination of these products are active copper cables with minimal insertion loss and skew.KEY_TAB KEY_TAB These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability.
DVIGear DVI-2460-SHR HDMI to DVI-D Super High Resolution Copper Cables 60 Meters Features:
Cables 20m or longer include DVIGear's ACE & trade; (Active Cable Extender)
Supports HDTV resolutions up to 1080p with 12-bit color
Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60m
Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m
Supports HDMI data rates up to 2.25 Gbps. at lengths up to 40m
Supports PC data rates up to 1.65 Gbps. at lengths up to 60m
Heavy-duty 22AWG copper wires provide minimal insertion loss
Ultra-low Skew guarantees unsurpassed digital fidelity
Triple shielded for superior noise immunity
Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
DVIGear DVI-2312-SHR DVI-D SHR 22AWG, 12.5 Meters Cable w/3-Yr Warranty
DVIGear DVI-2312-SHR DVI-D Super High Resolution Copper Cables 12.5 Meters are engineered for unsurpassed performance and reliability in mission critical applications.KEY_TAB KEY_TAB These cables are designed to transport high speed digital DVI and HDMI signals over very long distances while maintaining pristine signal / bit integrity.
High-Speed SignalsKEY_TAB & mdash; Long distance transport of high resolution DVI and HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter.KEY_TAB KEY_TAB Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing.KEY_TAB KEY_TAB Skew occurs when the differential DVI and HDMI signals get delayed and become out of phase as they pass over a long cable.KEY_TAB KEY_TAB Both factors contribute to increased digital jitter, which degrades the performance of the cable.KEY_TAB KEY_TAB This jitter becomes more severe with higher resolutions and longer cable distances.KEY_TAB KEY_TAB Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances.KEY_TAB KEY_TAB The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced DesignKEY_TAB & mdash; Built to overcome these challenges, the SHR & trade; Series DVI Cables are constructed using heavy gauge 22AWG copper wires.KEY_TAB KEY_TAB This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter.KEY_TAB KEY_TAB When coupled with DVIGear & rsquo;s Active Cable Extenders (ACE & trade;), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with DVI and HDMI signal parameters.KEY_TAB KEY_TAB The combination of these products are active copper cables with minimal insertion loss and skew.KEY_TAB KEY_TAB These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability.
DVIGear DVI-2312-SHR DVI-D Super High Resolution Copper Cables 12.5 Meters Features:
Cables 20m or longer include DVIGear's ACE & trade; (Active Cable Extender)
Supports HDTV resolutions up to 1080p with 12-bit color
Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60m
Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m
Supports HDMI data rates up to 2.25 Gbps. at lengths up to 40m
Supports PC data rates up to 1.65 Gbps. at lengths up to 60m
Heavy-duty 22AWG copper wires provide minimal insertion loss
Ultra-low Skew guarantees unsurpassed digital fidelity
Triple shielded for superior noise immunity
Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
DVIGear DVI-7317-Tx 4K HDMI Fiber Optic Extender Transmitter, 1x LC w/3-Yr Warranty
DVI Gear DVI-7317-Tx 4K HDMI Fiber Optic Extender Transmitter, 1x LC is a high performance 4K Optical Extender that transmits high resolution HDMI signals over extreme distances using a single fiber optic cable. It supports HDMI v 1.4 (HDCP compliant) signals with resolutions up to 3840x2160 /30p ( 4:4: 4) and 3840x2160 /60p ( 4:2: 0) over cable distances of up to 1, 000 ft. (~ 300 m). The extender set consists of an optical transmitter module that converts the HDMI signals into light pulses for transmission over a single strand of Multi-Mode or Single-Mode optical fiber cable. An optical receiver module converts the light pulses back to an HDMI signal for display on a monitor or projector. While the video component of the signal is one-way, the unit also simultaneously supports extension of bidirectional signals such as EDID and HDCP pass-through. The data rate from the TX to RX is 10.3 Gbps. using the 1310nm wavelength, while the reverse channel travels from RX to TX over 1550nm at 250 Mbps. The extender uses wavelength-division multiplexing (WDM) to enable both signals to travel over a single strand of optical fiber. This enables DDC communications without the need for additional cables. These features make the DVI & #8209; 7317 the ideal future-proof choice for systems designers and integrators who need to support high resolution HDMI / DVI signals with or without HDCP over extreme distances. DVI Gear DVI-7317-Tx 4K HDMI Fiber Optic Extender Transmitter, 1x LC Features: Supports HDMI v 1.4 (HDCP compliant) Supports resolutions up to 4K (UHD): 3840x2160 /30p ( 4:4: 4), 3840x2160 /60p ( 4:2: 0) Maximum extension distances: HDCP Not Supported: SMF: > 1.2 miles (~ 2, 000 m) OM4 MMF: > 2, 600 ft. (~ 800 m) OM3 MMF: > 1, 800 ft. (~ 500 m) HDCP Supported: All Fiber Types: 1, 000 ft. (~ 300 m) Extends signals over a single strand of LC-terminated optical fiber Supports EDID pass-through communications Optical fiber transmission is immune to environmental signal noise Low RFI / EMI profile for sensitive applications The Transmitter may be powered from most USB Ports using an optional USB adapter cable
USB Optical Wired Computer Mouse with Rainbow LED Lights Soft Press Click for Office and Home1200DPI Premium and PortableCompatible with Windows PC Laptop Desktop
Color: White/Blue Computer USB Mouse, Precise Clicking Use Speed 1200 DPI high-definition Tracking EngineEnjoy Responsive And Smooth Cursor Control Plug And Play, No drivers or software are needed Rainbow LED Light colorful Operating System with MAC OS X 10.1 And Later, Microsoft Windows XP/Vista/7/8/10 Advanced buttons and Micro switches reduce the force needed to click, 10 millions life switch for click mouse, our worry-free 12 month warranty, and friendly customers service.
Metal 200 Channels UHF Wireless Microphone System with 2 Handheld Microphones and Auto Scan, for Church, School, Outdoor Wedding, Meeting, Party and Karaoke (SWM26-U2HH)
**********INTERFERENCE FREE: the wireless microphone system comes with Ultra-High Frequency (UHF, 510-560 MHz) which is less likely subject to interference from other equipment compared with a VHF system. It has 200 selectable frequencies (100 frequencies each channel) and is compliant with the latest FCC regulations*****AUTO-SCAN: the system comes with AUTO-SCAN function which automatically locates a clear channel to avoid frequency interference. Once an open frequency is located, turn on the transmitter (handheld or lavalier microphone) and set to the same frequency with the receiver. Even with multiple existing systems in use, this function ensures a consistent microphone signal with minimal dropout and noise interference*****FULL COMPATIBILITY, EASY TO SET UP: the receiver comes with both 1/4 mix out and XLR outputs for professional use. With two detachable antennas, independent volume controls and a large LCD display, this wireless microphone system can be easily set up with you
Car Screen Protector Center Control Navigation Screen Protector for 2019 GMC Sierra 1500 Tempered Glass HD Scratch Resistance 2019 Sierra 8IN
***** *****PERFECT FIT: Customized for GMC Sierra 1500 8 inch 2019 2020 with high quality of tempered glass material. The glass surface feels much better than the original plastic screen. Orient the protector correctly and the protector will match the screen perfectly *****HIGH DEFINITION: The protector wont reduce the visibility of the screen, but keep your screen brand-new. Does not interfere the sensitivity of the screen or reboot your system, it provides a glossy feeling for your screen instead *****SCRATCH RESISTANCE: 9H hardness of tempered glass provides adequate protection against scratch, shock and explosion, a great add-on to protect your screen *****ULTRA-THIN: 0.26 mm thickness makes your screen glossy and clear. 6-layer coatings of the protector can reduce oil left from your fingerprints and provides smoothness to the screen *****EASY TO INSTALL: Align the protector with your screen, then install it with the coming accessories that makes the installation easy. Installatio
Finger Strap for Phone Phone Grip | Phone Stand | Phone Holder for Back of iPhone Samsung HTC Android iPad Mini Teal
Color: Denim BlueCAUTION: 1. Do not put the product on hot material or machine. 2. Becareful not to be swallowed by children. 3. Repeated detachment can reduce the adhesion of the gelpad. 4. The gelpad will not stick on silicone, glass or matte coated surface. 5. Please push up and down several times before using it. Product Features: Fits most Smartphones and Cases, Kindle, Car Vent mount option. Fits Most teenagers, most women and most men. Reusable - Phone strap is not with one-time adhensive tape but 3M Nano adsorption tape instead which is super stikcy and reusable. After wash by water to clean the dust, the stickness is coming back. Except for silicone rubber or oily surface of phone or case, the strength that MultiBand sticks to handheld device is increasing by time so it will hold your phone securely. Nice slim pocket-friendly design, Anti-drop, Anti-theft. Push up the holder when you need, and push back when you put the phone into the pocket. Practical and Handy - Release your hands free by 1 or 2 fingers to spare more space for other business and easily slip into a pocket without a catch. HOW TO USE: 1. Clean dust and dirt of your phone or tablet. 2. Remove the protective layer of the holder, and paste it up to your phone. 3. Press tightly by hand to ensure stickness. 4. Push up the band to use it as a finger grip or stand. NOTE: 1. On-screen images of finishes and colors may vary from actual product due to variations in monitor and image capture settings. 2. Better apply the band to flat and smooth surface in case of sudden fall. 3. Fit the band into the car air vent, you can use it as an AC holder. 4. If you want to remove it, simply take the phone grip off, then wash it, dry it, and it will be sticky like the first time you use it. Package content: Cell Phone Finger Grip
Basics Lapel Microphone  Omnidirectional Mic - Black
Color: Black | Weight: 1 PoundsAn Brand
Laserjet Pro M404dn Monochrome Laser Printer With Built-In Ethernet & Double-Sided Printing - Ethernet Only (W1A53A) with Standard Yield Black-Toner-Cartridge
***** **********Best Quality Guranteed. *****Built to keep your business moving forward Print consistently high-quality documents with the LaserJet Pro M404dn, A monochrome laser printer designed to let you focus on growing your business*****Best in class security a suite of embedded security features, like instant threat notifications and optional Pin/pull printing, help protect your laser printer from being an entry point for attacks and help ensure the safety of your sensitive data*****Speed through tasks stay productive with automatic 2 sided printing, A 250 sheet input tray, fast first page out time, and Print speeds of up to 40 pages a minute from this Black and White laser printer*****Share resources on your network easily access, Print, and share resources with built in Ethernet capabilities *****58A toner cartridges work with printers: LaserJet Pro M404 Printer series, LaserJet Pro M428 Printer series. *****Original toner cartridges produce an average of 71% more usable p
40X-1600X Trinocular Lab Compound Microscope with Double Layer Mechanical Stage
***** **********Best Quality Guranteed. *****Head: 45 degrees inclined 360 degrees swiveling trinocular; Nosepiece: revolving quadruple; Eyepieces: wide field WF10X and P16X; Objective: achromatic DIN 4x, 10x, 40x (S), 100x(S, Oil); Total magnification: 40x-64x-100x-160x-400x-640x-1000x-1600x*****Transmitted (lower) illuminator: 6V/20W Halogen; Stage: mechanical double layer size: 5-1/2inch x 5-1/2inch (140mm x 140mm); Stage x-y stroke (travel range): 3inch x 2inch (75mm x 50mm) *****Photo tube adjustment range: 3/4inch (18mm); Focus adjustment: Coaxial coarse and fine knobs on both sides; Focusing knob can be locked for observation and transportation*****Condenser and diaphragm: NA 1.25 Abbe condenser with iris diaphragm; Power supply: 100V~240V 50/60Hz worldwide range (US and Canada plug) *****5-year warranty against manufacturing defects
VoiceX Golf GPS Rangefinder w/ LCD Display & iOS Android APP Support
**********VERSATILE: Smart talking golf and GPS audio rangefinder with clock mode*****GOLF: Preloaded with over 38, 000 courses worldwide*****RANGEFINDER: Dynamic green view and distance readings from the golfers position*****BLUETOOTH: Wirelessly course synchronization via Bluetooth*****BATTERY: Up to 11-hours of runtime on a single charge
AC1900 Smart WiFi Router (Archer A9) - High Speed MU-MIMO Wireless Router, Dual Band, Gigabit, VPN Server, Beamforming, Smart Connect, Works with Alexa, Black
Model: AC1900Maximum wireless transmission rates are the physical rates derived from IEEE standard 802. 11 Specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
zip ties heavy duty with selflocking 660 pack 4681012 Inch Multisize multicolorNot easy to break and loose cable tiesUV Resistant zip tietie warpsplastic tiesblack and white
**********MULTI-SIZE, MULTI-COLOR, MULTIPURPOSE: Cost-effective 660-PACK black and white plastic zip ties of different lengths, suitable for a variety of purposes: cable ties can be used in homes such as computers, TV, garage, packaging; zip tie can also be used for agricultural gardening; tie wraps can also be used for office use; plastic ties can also be used for lighting, electrical, electronics, workshops Neat, item attachments etc. zip ties fixed in the oil pipelines of cars and ships. *****THICK, NOT FRAGILE, NOT EASY TO BREAK: (4/6/8/inch) the tensile strength of the self-locking nylon zip ties is 18 lbs and (10/12 inch) the tensile strength of the self-locking nylon cable ties is 50 lbs; ( 0.12 inches and 0.19 inches in width, respectively), which can be used to increase tensile strength by continuously using more tie wraps. The 10" and 12" heavy-duty, durable nylon zip tie can withstand bending strengths of up to 50 lbs (22 kg), and are stronger than other plastic ties. *****EASY TO
DVIA M To VGA F Adapter GDVIMVGAF
s DVI-A (M) to VGA (F) Video Adapter allows you to connect a DVI-A device to a VGA device using an VGA cable. One end of the adapter is an DVI-A male connector and the other end is VGA female connector. Simply plug the DVI-A male connector to a DVI-A supported device, and then connect a VGA cable which is plugged into the VGA device to the VGA connection on the adapter.
Inc Portable TopLoading CD Boombox with AMFM Radio and 35mm Line In for MP3 Device RedBlack
Color: Red/black | Style: SingleThe BC232 Portable Boom box comes with a top-loading CD player that has a 20 track programmable memory and can play CD and CD-R/RW discs. The negative LCD display with white backlight makes it easy to see what track number is playing. An AM/FM radio with telescopic FM antenna and built-in AM antenna make this music system perfect for people on the go. A 3.5 mm audio line input and built-in speakers allow users to play their favorite songs direct from their MP3 music devices. Each Portable Boom box comes standard with an AC power cable (included), or can operate cordlessly with 6 C batteries (sold separately). Included in the box is the Boom box, AC power cable, warranty card and a user's guide. For more than 30 years, has offered one of the broadest portfolios of technology-driven consumer audio and video products. An award-winning consumer electronics company, has built a solid reputation on excellent product quality, reliability, design, and affordability.
Remote Control Holder with 5 Compartments Black TV Remote Caddy Desktop Organizer for TV, DVD, Blu-Ray, Media Player, Heater Controllers
Tired of searching remotes or messy desktop? The Remote Control Holder is a must-have desk supplies organizer that helps avoid clutter forever and manage your devices with consummate ease. Durable and Well Made: Made of high quality PU leather for lasting performance and easy to clean. Soft lining interior offers device protection to against scratch and abrasion. Classy design adds subtle class to your home dcor without detracting from your style or layout. Classify and Easy Access: Comprised of 5 compartments to help classifying your stuff. Great for desk organization for all your favorite devices, including the TV, cable box, Roku, Apple TV, Fire TV, soundbars and more. Also allow you to move the entire remote easily access the device remote desired. Multi-functional: Best for home and office uses. Not only can keep your TV remote control, multi-media entertainment remote controller and other devices together but store your stationery like pens, scissors, eyeglasses at office or as a makeup brush organizer at bedroom. Perfect Size: Each measures 8.5 * 2-3/4 * 4.5 inches (L*W*H); The width of each compartments is 1.5 inches. The TV remote caddy organizer fits easily on a coffee table or a desk.
Thermal Laminator Combo Pack Includes 20 LetterSize Laminating Pouches Holds Sheets up to 85 x 11TL902VP Two Pack
Size: 2 Pack (Laminator with 20 Pouches) 2 Pack
Allin1 Bluetooth Record Player with Built in Speakers and 3Speed Turntable Black VTA65BLK
Color: Black All-in-1 Bluetooth Record Player with Built in Speakers and 3-Speed Turntable Black (VTA-65-BLK)
