DPA Microphones DPA-2028-B-B01 D-factor 2028 Supercardiod Vocal Mic - Wired DPA Handle, Black
D-factor 2028 Supercardiod Vocal Mic - Wired DPA Handle- Black
DPA Microphones 2028-B-B01 d:fracto 2028 series is a supercardioid wired- handheld vocal microphone.
Built for Life on the RoadOne mic allows you to capture true sound and produce an unforgettable show. Effortlessly. The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic- which provides transparent- fantastic vocals to performers from a wide range of markets including live- HoW- broadcast- etc.
The 2028 sports a supercardioid capsule with the famously flat DPA off axis response. This gives the microphone a very high gain before feedback and at the same time makes it so much easier for sound engineers to handle bleed from other instruments at close proximity. The 2028 picks up these off axis sounds in the most natural way.
We have designed a brand new capsule for the 2028- which is an integral part of the mic. It is fixed in its position on top of the shock mount and can't be dismounted. The newly designed shock mount and pop filter have been developed specifically for the 2028.
On a live stage- the 2028 will deliver the same open and transparent sound that other DPA microphones deliver. In fact- it needs no (or very little) EQ to sound just like you are standing next to the singer listening to their performance. This allows the singer to use their voice just as if no mic was present- which puts less strain on them. In addition- it allows sound engineers to spend their time shaping the sound experience rather than covering up due to artifacts. This amazing transparency is unique for DPA vocal mics.
Features:
Renowned DPA sound
Natural vocals - from folk to metal
Reduces feedback issues
Rugged enough for the live stage
Uniform supercardioid directionality
Extreme SPL handling
Lightweight and Durable
Specifications:
Directional pattern: Supercardioid
Connector Type: XLR
Sensitivity- nominal- ± 3dB at 1kHz: 5mV/Pa; 46dB re. 1V/Pa
Equivalent noise level- A-weighted: 22 dB(A)
Total Harmonic Distortion (THD):
DPA Microphones DPA-TSM4001 Table Shock Mount
The TSM4001 Table Shock Mount is a highly stylish fixed microphone mount. It is optimized for the weight and dimensions of our d:screet and d:dicate podium mics and mic boom poles.
The Table Shock Mount suggestion the best shock rejection obtainable of any integrated podium mount. Vertical softness absorbs handling vibration. Horizontal movements are controlled to prevent the podium boom from touching the mount. Best performance is obtained with mics weighing between 140 g (5 oz) and 240 g (8.5 oz). The Table Shock Mount is designed to match the sleek Scandinavian look of our d:screet and d:dicate Podium Microphones. The top part of the mount can be custom ordered with different finishes to match surrounding architectural appearance. The Table Shock Mount is easy to mount. It only requires a hole in the table plate with a diameter between 55-59 mm (2.16-2.32 in). The mount fits plate thicknesses from 8-38 mm (0.31-1.49 in).
Table Shock Mount
DPA Microphones DPA-4099-DC1199G 4099 CORE Microphone with Loud SPL & Clip for Violin
Much more natural sounding than any internal microphone or pickup- the 4099-DC-1-199-G d: vote rejects unwanted noise and accurately captures the true voice of acoustic instruments. One microphone reinforces the entire orchestra impressively. Features CORE by DPA technology inside Supercardioid condenser microphone Handles high SPLs Superior gain-before-feedback Flexible and easy mounting Gentle and easy to mount on the instrument Detachable cable and a versatile gooseneck extenderSpecifications Color: Black Directional pattern: Supercardioid Principle of Operation: Pressure gradient Cartridge Type: Pre-polarized condenser Effective Frequency Response: 20 Hz - 20 kHz Equivalent noise level- A-weighted: Typ. 23 dB (A) re. 20 Pa (max. 26 dB (A) ) Dynamic Range: Typ. 108 dB Max. SPL- THD 10%: 142 dB SPL peak Cable Drive Capability: Up to 300 m (984 ft) with DAD4099 or DAD6001-BC XLR Adapter Output Balance Principle: Signal balanced with DAD4099 or DAD6001-BC XLR Adapter Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter Power Supply: Min. 5 V to max. 50 V through DPA adapter for wireless systems Current Consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099 or DAD6001-BC XLR Adapter Connector: MicroDot Microphone Diameter: 0.21 - Weight: 2 lbs
DPA Microphones DPA-DAD3056 Adaptor & Lectrosonics LM, SM & UM Series for Low DC Microphones
DAD3056: Lectrosonics LM- SM and UM series (for low DC microphones)Adapter for DPA Miniature Microphones with low DC- Type 4063 and 4067. MicroDot for TA-5F Switchcraft.
Features
The adapters for wireless systems give you flexible
Simple and affordable possibilities
Instead of incurring the cost of a whole new microphoneSpecifications
Weight: 0.5 lbs
DPA Microphones DPA-4080-BU Cardioid High Sensitivity Lav Mic with Pres Boost & Low Cut
While d:screet™ Omni Mics are ideal for situations where a broad pickup pattern is essential and off-axis noise is not a problem- in some challenging acoustic environments a directional microphone is the better choice. The d:screet™ 4080 Cardioid Lavalier captures the human voice with an unusually high degree of definition. This mic offers maximum side rejection and excellent sonic focus on the subject. It is designed for broadcast- conference and other live performances both in the studio and in the field.
Features
Excellent speech reproduction
Discreet- compact design
Fits both left and right buttoned shirts
Delivered with both black and white pop filters
Modular adapter system fits most professional wireless systemsSpecifications
Directional characteristics: Cardioid
Principle of operation: Pressure Gradient
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range- ± 2 dB: 250 Hz - 17 kHz with typ. 4 dB soft boost at 4 - 6 kHz (-5 dB at 100 Hz)
Equivalent noise level- A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Dynamic Range: Typ. 100 dB
DPA Microphones DPA-4060-OC-CB00 D-Screet CORE 4060 Omni Lav Mic Normal SPL MicroDot - Black
The 4060-OC-C-B00 high-sens- normal SPL- black d:screet Core 4060 Miniature Omnidirectional Microphone with Hardwired MicroDot Connector from DPA is designed for use with wireless systems in performance and theatrical presentations. The Core 4060 miniature microphone amplifier delivers a 6 dB increase in dynamic range and a 6 dB reduction in THD (total harmonic distortion) over the 4060 Legacy model. Because of its small size- the microphone is highly unobtrusive and is suitable for broadcast- live stage- and instrument applications as well. The d:screet Core 4060 includes interchangeable capsule protection grids that alter the sonic character of the microphone. A high-boost grid creates a peak at 12 kHz- bringing an airy texture to audio signals. The soft-boost grid creates a subtle boost between 8 to 20 kHz- enhancing signal presence. With an SPL rating of 134 dB- the microphone is more than capable of reproducing transient (peaking) audio before clipping. The Core 4060 is powered via +48V phantom power and features a MicroDot output connector- compatible with various wireless microphone transmitters- or power supplies with standard XLR outputs.
Features
For Stage and Television
Hardwired MicroDot Connector
High-Sensitivity- Normal SPL
Core Increases Mic Performance by 6 dB
Suitable for Wireless Transmitters
Humidity-Resistant Design
Includes Soft- and High-Boost Grids
An Adapter is RequiredSpecifications
Color: Black
Sound Field: Mono
Operating Principle: Pressure Operated
Transducer: Condenser
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz to 20 kHz
Signal to Noise Ratio: 71 dB A-Weighted
Equivalent Noise Level: 35 dB ITU-R 468
Maximum SPL: 134 dB SPL Peak
THD: < 1%
Impedance: 40 Ohms
Sensitivity: 20 mV/Pa at 1 Hz
Dynamic Range: 106 dB A-Weighted
Weight: 1 lbs
DPA Microphones DMM0015 Double 4080 Lavalier Microphone Clip
The DMM0015 is a flexible clip for mounting two DPA 4080 Miniature Cardioid Microphones on a speaker offering optimum safety in terms of backup if one of the wireless channels should fail to function. The 4080's rubber shock mount can easily be dismounted from its enclosed clip (DMM0014) and attached to one of the ball-shaped fixation spots on the DMM0015 Double Clip. To increase the system's cable noise immunity, the DMM0015 features a short cable trail for securing each microphone cable.
DPA Microphones d:screet SC4098-BM75 Supercardioid Podium Microphone
Clean, intelligible sound is key when a speaker is addressing a crowd. d:screet SC4098 Supercardioid Podium Microphones deliver high intelligibility. This combines controlled directionality with rejection of background noise. These microphones are designed around d:screet Miniature Microphone Capsules and interference tube technology. The SC4098 lends itself to a host of applications such as hanging mic applications or for a wireless podium solution. d:screet SC4098 Supercardioid Podium Microphones are available with a MicroDot connector. This makes them suitable for a wireless setup. No more cables across the stage; simply connect the podium microphone with a wireless transmitter. Your stage setup is more flexible than ever. d:screet SC4098 Supercardioid Podium Microphones offer extraordinarily high speech intelligibility and clarity of voice. They provide linear, natural sound combined with an elegant visual look of Scandinavian design. Boom pole lengths and gooseneck choices can be tailored for specific requests. Standard types, 30 cm (12 in) and 45 cm (18 in) with top and bottom goosenecks, are available in black. The short 15 cm (6 in) variant is ideal for table or hanging applications and comes in both black and white. The SC4098 Supercardioid Podium Microphone is available in many variants. It comes in either black or white, with either an XLR or a MicroDot termination and in five lengths ranging from 16 cm (6 in) to 122 cm (48 in).
DPA Microphones d:screet Core 4060 Mini Omni Mic, MicroDot, Normal SPL, Black
DPA Microphones d:screet Core 4060 Miniature Omnidirectional Microphone with MicroDot Connector, Normal SPL, High-Sens, Black
DPA Microphones d:fine FIOF10-2-IE2-B Dual-Ear Omnidirectional Headset Mic,Beige
Available in black, beige and brown, d:fine has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible. Just by rotating the boom and the earhook, the microphone can be moved from left to right ear or into the optimum position. Staying true to the DPA legacy, d:fine offers accurate, natural voice intelligibility and very high SPL capabilities - users can both speak and sing into the mic with no hint of distortion. d:fine is available in both omni and directional versions. Intensive protection against pop and wind noise is integrated in the microphone design and windscreens are included. d:fine is available with single- or dual-ear mounts. The dual-ear mount is dedicated for more active situations and will be safe in even the most rigorous and energetic performance applications. Boom lengths Three omnidirectional boom lengths are available to accommodate different applications and head sizes: 110 mm (4.3 in), 90 mm (3.5 in), 40 mm (1.6 in). Two directional boom lengths are available: 120 mm (4.7 in), 100 mm (3.9 in). Cables A service connector splits the cable from the microphone boom and allows for quick exchange of cable lengths/colors/connectors and is valuable for servicing broken cables. Accessories The d:fine mic with boom, earhook and cable is delivered in a neat, roadworthy box with room for accessories like transmitters and batteries. The DPA accessory line includes power supplies and adapters or cables with fixed connectors (MicroDot, 3-pin Lemo, TA4F Mini-XLR, Mini-Jack). Features Pristine audio quality Easy single-ear or dual-ear mounting Minimal visual impact Adapts to all pro wireless systems
