arlington industries arlington tvbr22k1 inwall, prewired tv bridge kit, 2gang, 1pack, 2gang upper, 2gang lower
Arlington TVBR22K-1 TV bridge kit, 2-gang, 1-pack. Easiest and fastest way to install flat screen TV wires in the wall. Includes two boxes and the necessary connections, installation is faster because the advanced assembly work is done. Includes a fully assembled box, with pre-wired receptacle, device, flexible cord and cord grip. Mounting wings hold box secure against the wall, wires inside so the TV can be more flush against the wall. Includes outlet receptacle and brush cable-entry opening. Unit includes an Angled 2-gang combo power/LV box and a regular combo 2-gang power/LV box on bottom. All you need to do is cut two openings in the wall, near a power source, no need to cut into your framing members or run power from a panel.UPC NO:018997242235 SKU:ADIB01N0Y12T3
Arlington Security Camera Mounting Box (8161TR)
The Arlington Security Camera Mounting Box allows you to easily mount a security camera, detector, or accessory to a wall or ceiling. Adjustable threaded openings provide maximum installation flexibility.
Mounts security cameras, electrical accessories and fixtures
Use indoors or outdoors in dry, damp or wet locations
UV rated for long outdoor life
Maximum fixture weight: 50 pounds on ceilings, 10 pounds on walls
Minimum fixture diameter: 4.5"
NM94 ARLINGTON INDUSTRIES PLASTIC PUSH IN CONNCTRS
3/8" NM Cable Connector, Push In, Plastic
Arlington Low-Voltage Mounting Bracket, 2-Gang
Package Includes 1 LV2 2 Gang Low Voltage Bracket
Arlington LV Retrofit Single Gang Low Voltage Bracket
Features* Product Type: Mounting Bracket * Brand Name: Arlington * Device Supported: Flat Panel Display * Product Type: Mounting Bracket * Product Series: LV * Brand Name: Arlington * Compatibility: Cable TVComputer Wiring * Product Name: LV Retrofit Single Gang Low Voltage Bracket * Device Supported: Flat Panel Display * Packaged Quantity: 10
Arlington Industries - 8091F - Siding Box Kit - Fixtures And GFCI Receptacles
Arlington 8091F Plastic Vertical Mount All Siding Box Kit With Flange 6.5 Inch x 1.125 Inch x 6.5 Inch
Arlington - Fan & Fixture Mounting Box w/ Adjustable Brackets - FBX900
Fan & Fixture Mounting Box with Adjustable Brackets for New Construction. Mounts fans and fixtures on cathedral ceilings between two framing members for perfect centering within room. Expandable brackets hold box securely between joists – no need to cut and nail 2x4s to center the fan or fixture. Allows fans/fixtures to be perfectly centered within room. Large, 8” square mounting surface handles newer fans with larger canopies. No loose parts to misplace – totally self-contained! Installs quickly and securely.
Arlington Industries - DVFR3W - Recessed 3 Gang InBox For New Retrofit Contruction
Non-metallic, recessed electrical boxes with trim plates and wall plates. Low voltage divider included for multiple gang boxes. (3-Gang) • Recessed box allows items, such as furniture, to be placed closer to the wall • Plugs don’t extend past the wall like a regular box • Trim plate is textured/paintable • For power or low voltage applications • Mounting wings hold bracket securely against wall when screws are tightened
NMLT75 ARLINGTON INDUSTRIES 3/4" NON MET.LIQUID TIGHT CON.
NMLT75 9N-NMLT75 ARLINGTON INDUSTRIES 3/4" NON MET.LIQUID TIGHT CON.
Arlington DVFR1W-1 Recessed Electrical/Outlet Mounting Box, Single Gang
Arlington DVFR1W-1 Recessed Electrical Outlet Mounting Box w/ Paintable Wall Plate, 1-Gang, WhiteRecessed box allows items, such as furniture, to be placed closer to the wallPlugs don't extend past the wall like a regular boxTrim plate is textured / paintableFor power or low voltage applicationsPositioning tabs for 1/2 Inch wall thickness assure accurate placement on studsNeed more information on this product? Click here to ask. From the Manufacturer Arlington DVFR1W-1 Recessed Electrical Box Single Gang. Arlington's Recessed Indoor IN BOX, DVFR1W-1, is for New and Retrofit Construction. Non-metallic, recessed electrical box with trim plate. It's a recessed box so plugs don't extend past the wall, like they do in a regular box. You can mount TVs flush or push furniture closer to the wall.
Arlington CED135 Decora-Type Cable Entry Device w/ Brush-style Opening
Arlington CED135 Decora-Type Cable Entry Device w/ Brush-style Opening condition: New Brand: Arlington IndustriesCountry/Region of Manufacture: United StatesMPN: CED135
Arlington LVS3 3-Gang Screw On Low Voltage Mounting Bracket for New Construction
Arlington LVS3 3-Gang Screw On Low Voltage Mounting Bracket for New Construction condition: New Brand: Arlington IndustriesCountry/Region of Manufacture: United StatesMPN: LVS3Code : 5ca-159586000222808
Arlington LV2-1CS Low Voltage Mounting Bracket, 2-Gang, 1-Pack
"Arlington LV2-1CS Low Voltage Mounting Bracket, 2-Gang, 1-Pack. Designed to mount wall plates flush. Horizontal or vertical mounting; UL/CSA listed. Adjusts to fit 1/4 Inch to 1 Inch thick wall board, paneling or drywall. 1-pack of Low Voltage Mounting Brackets. mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job. "
Arlington Industries - CED130 - 1 Gang Non Metallic - Slotted Cable Entry Device
The CED130 is a Cable Entry Device that has a new style slotted opening. It accommodates a decorator-style wall plate.
ARLINGTON BE2 2-Gang Box Extender, Up to 1-1/2" (Mounting Screws NOT Included)
2-Gang Box Extender, Up to 1-1/2" (Mounting Screws NOT Included)
Arlington - 23" - Non-Metallic - Meter Mount Block - 23" Tall 17.625 - MM23
Meter Mounting Bases. One-piece construction. Paintable. Gangable. UV rated plastic for long outdoor life. Provides a smooth, flat mounting surface. Provides a 1” overhang to cover siding. Gangable to accommodate most meter sizes. Break off flanges for retrofit work. All types.. 75" x 1.1" x 23".
Low Profile In Box Old Work Recessed Electrical Box White Cover ARLINGTON DBVR1W
One-piece recessed electrical box with weatherproof in-use cover for flat surfaces in existing construction non-metallic cover and base accepts most single gang wiring devices and uses standard indoor wallplates or gfci cover uv rated plastic for long outdoor life
Arlington Industries TVBS505-1 TVBS505 Recessed Outlet Wall Plate Kit, 2-Gang, White
"Arlington TVBS505-1 Steel TV Box Recessed Outlet Wall Plate Kit, Steel box with non-metallic paintable trim plate. Perfect way to mount flat screen TVs flush against the wall. Recessed bracket sits behind the wall to help you hide wires. Adjusts to fit 1/4-Inch to 1-1/2-Inch thick wall board, paneling or drywall. Designed for power and low voltage wiring-perfect for lcd, led, plasma tv in black. "
Arlington FLBR101BR Electrical Box Floor Kit with Outlet and Oversized Plastic Plate, 1-Gang, Brown
Arlington FLBR101BR-1 Floor Electrical Box Kit with Outlet and Plate, for Installed Floors, 1-Gang, Brown, 1-Pack. 1-Gang Brown Floor Electrical Box Kit with Outlet and Plate for Installed Floors. Cover gasket prevents water intrusion, plate protects outlet when not being used. We have a floor box for any jobsite; this is designed for installed floors, we also make them for new concrete. Oversized covers hide miscut carpet for floor. For a neat, convenient way to put a receptacle (outlet) in the floor. Includes Floor Box, duplex receptacle, back plate, gasketed cover plate with threaded blanks and (5) #6-32 cover plate screws.
Arlington Industries - BE1 - Single Gang - Box Extender Up To 1-1/2 Inches(Mounting Screws NOT Included)
1-Gang Box Extender, Up to 1-1/2" (Mounting Screws NOT Included)
Arlington Industries - LV1 - Single Gang - For 1/4" to 1" Walls - Low Voltage Device Mounting Bracket
Low Voltage Mounting Brackets
Designed to mount wall plates flush
Adjust to fit 1/4" to 1" wall board thickness
Horizontal or vertical mounting
Single Gang Trade Size
Package of 1
Note: For low voltage class 2 use only
Arlington Industries AACER1x-AACER1 Reversible 2 Piece Low Voltage Cable Access Plate, 1 Gang, White
Size: One-gangNon-Metallic, paintableColor: WhiteIncludes 4 Mounting ScrewsDimensions: 4-5/8in H x 2-13/16in WModel CER1 Cable Entry Cover Plate features a removable lower plate which provides easy access to installed cable. The SCOOP? series of reversible non-metallic entrance hoods and plates not only protect cable, but offer good looks and installation versatility. Easy to install facing IN or OUT. For use only with LOW VOLTAGE CLASS 2.
Arlington Industries TVBS505 2-Gang Steel TV Box Recessed Outlet Wall Plate Kit, White, 1-Pack
Steel box with non-metallic paintable trim platePerfect way to mount flat screen TVs flush against the wallRecessed bracket sits behind the wall to help you hide wiresAdjusts to fit 1/4-Inch to 1-1/2-Inch thick wall board, paneling or drywallDesigned for power and low voltage wiring-perfect for lcd, led, plasma TV in blackArlington TVBS505-1 Steel TV Box Recessed Outlet Wall Plate Kit, Steel box with non-metallic paintable trim plate. Perfect way to mount flat screen TVs flush against the wall. Recessed bracket sits behind the wall to help you hide wires. Adjusts to fit 1/4-Inch to 1-1/2-Inch thick wall board, paneling or drywall. Designed for power and low voltage wiring-perfect for lcd, led, plasma tv in black.
Arlington Industries - BE1R - Round Ceiling Box Extender - For 3-1/2" & 4" Round - 1-1/2 Extension (Mounting Screws NOT
"Arlington BE1R Plastic 1-Gang Ceiling Box Extender 4.35 Inch x 1.5 Inch. "
Double Gang Scoop Plate White With Removable Section-2pack
Reversible Two-Piece Low-Voltage Cable Entrance Plate
Loop Hanger, PVC, Max Cap 2In, 25Lb (1)
Sold in packs of 20. The LOOP (TM); Cable Support Hanger; 2" Hanger for communications cable support. For CAT 5, 6, 7 cable and fiber optic cable. Easy to use... cheaper than trays! Flexible and non-metallic Holds 2" diameter bundle of CAT 5 or fiber optic cable — without damaging the cable. Available with or without UV rating Versatile mounting — rotates to any angle! TL25 holds the same amount of cable as a J-hook, at half the cost!
Mounting Bracket Plastic Single Gang Low Boltage 100/box
Low Voltage Mounting Brackets
LIQUID TIGHT STRAIN RELIEF - 1/2 INCH NPT THREAD, W/1 ROUND HOLE FOR USE-2 #12 & #10 WIRE, .100-.300", GRAY, (PACK OF 5)
Use the 1/2" threaded connectors to provide a waterproof entrance or exit for wiring on PV module junction boxes, outdoor combiner boxes, and junction boxes. They are made of Nylon with Buna-N seals and are resistant to salt water, weak acids, weak alkalis, alcohol, ether, esters, ketones, and mineral, animal and vegetable oils. The threads are 1/2" NPT. Non-corrosive and suitable for direct burial installations. The one-hole 1/2" connector is designed for use with one #10 or #12 type USE conductors like the ones used for Multi-Contact PV output cables. Wire opening is 0.100 - 0.300 inch Opening narrows as nut is turned and rubber seal is compressed. Includes rubber washer and locknut. UL Listed. Suitable for use in NEMA 4, 4X, and 6 applications. Made in the USA! (Pack of 5)